How to use fabric softener and when to leave it out

Fabric softener conditions fabric; it does not replace detergent or a disinfectant. Use it only if the garment allows it, and add it during the specified cycle stage in the recommended amount.

The garment’s purpose determines whether fabric softener is suitable

For towels and other absorbent items, it’s important that they can absorb water; for activewear or garments with a membrane, moisture-wicking or protective performance matters. Check whether the care label rules out fabric softener. A softer feel doesn’t show that the treatment is suitable for these purposes.

If you don’t have a specific need for conditioning, you can leave it out. Don’t add it by default to make up for detergent residue or hard water: these issues need to be addressed at their source.

Measure the dose without releasing it too early

  1. Identify the designated compartment or the approved method if there’s no dispenser.
  2. Measure the product using its own dosing guide and observe the maximum-fill mark.
  3. Dilute it only when the packaging or appliance instructions say to; don’t add water out of habit.
  4. Avoid pouring concentrated product directly onto clothes or mixing it with detergent in a dispenser that isn’t designed for this.

If gel is left behind or the product isn’t dispensed, check the dispenser’s maintenance instructions. Moving it to another compartment may release it at the wrong stage.

For towels and activewear, follow any specific restrictions. If you experience skin irritation, review the formulation and washing routine without automatically assuming a cause.

View all articles in Laundry detergents, dosing and additives