E12 indicates overfill detection on the Midea L11. If the water level is rising or water is leaking out, stop the water supply and avoid triggering another alarm by starting a new cycle.
The L11 technical manual verifies the excessive water level condition. The code alone does not tell you whether the valve, water-level sensor or electronics have failed.
Record what happened without filling it again
Check whether water continued to enter after you stopped the programme and whether any water escaped from the appliance. Turn off the tap if you can do so safely. Do not turn it back on to check whether the problem happens again.
If water reaches electrical connections, do not touch it. Ask for help to isolate the power supply from a dry, safe place. Do not force the door open or tilt the machine to remove water from its base.
Even if the visible water level has dropped, make a note of E12 and arrange an inspection if it reappears. Do not enter the service mode described in the technical document or blow into pressure tubes: interfering with water-level detection can affect the fill safeguards.
A service technician should check the cause of the overfilling and how it is detected; clearing the warning does not prove that the circuit is working correctly.
View all articles in Midea washing machine error codes and warnings
