E5 is associated with the water supply on the documented Toshiba AW-E900LM. The tap, water availability and inlet restrictions are the first external checks.
Page 18 of the official AW-E900LM manual confirms this procedure. Its flow rates and timings do not apply as limits to other Toshiba models.
If no water enters
Check that the tap is open and that there is no interruption to the water supply. If the appliance has been in a freezing environment, do not force a rigid pipe that may be frozen or apply a flame or boiling water; follow the recovery procedure in its manual.
Check whether the hose is crushed. The inlet mesh or filter should only be checked using the user procedure, after turning off the water and disconnecting the power supply before carrying out the specified work.
On the AW-E900LM, once the issue has been corrected and the drum has stopped, the manual says to open and close the lid and press Start/Hold. If E5 appears again when the water supply is available, report whether little or no water is entering and request an inspection. Do not attribute the warning to water pressure or the solenoid valve without checking.
If your Toshiba has a different model number, check the table first: sharing the E5 code does not guarantee the same filling logic.
View all articles in Toshiba washing machine error codes and warnings
