E5 is related to the water supply on the documented Toshiba AW-E900LM. The tap, water availability and inlet restrictions are the first external checks.
Page 18 of the official AW-E900LM manual confirms this troubleshooting path. Its flow rates and times should not be treated as limits for other Toshiba models.
If no water enters
Check that the tap is open and that there is no water outage. If the washer has been in a freezing environment, don't force a rigid hose if it's frozen, or apply a flame or boiling water; follow the recovery procedure in its manual.
Check whether the hose is crushed. The inlet screen or filter should only be checked using the user procedure, after shutting off the water and disconnecting the power before carrying out the specified work.
On the AW-E900LM, once the issue has been corrected and the drum has stopped, the manual says to open and close the lid, then press Start/Hold. If E5 appears again while the water supply is available, note whether little or no water is entering and request an inspection. Don't attribute the warning to water pressure or the inlet valve without checking.
If your Toshiba has a different model number, check its chart first: sharing E5 does not guarantee the same fill logic.
