How to use a semi-automatic or twin-tub washing machine

With a semi-automatic machine, you need to carry out the operations that the appliance does not perform automatically. In a twin-tub machine, the wash and spin tubs have separate capacities and limits, so you may need to divide the load when transferring it.

Identify the controls and capacities

Locate the wash timer, drain selector, water inlet and spin timer, if fitted. Check what each stated capacity refers to and the maximum load for each compartment. Do not assume the wash capacity is the same as the spin tub capacity.

Operating sequence

  1. Sort the laundry and check that the detergent, load and water level are within the limits specified in the manual.
  2. Set the wash and fill selector to the position indicated; do not exceed the markings or add water hotter than permitted.
  3. Add detergent using the specified method and set a compatible wash time.
  4. When the wash is complete, drain the water using the machine’s control and carry out the permitted rinse, using the water and stages specified in its manual.
  5. If you need to transfer the laundry, wait until all the mechanisms involved have stopped completely. Distribute the laundry in the spin tub without exceeding its limit.
  6. Fit the inner safety cover if required by the design, close the lids and select the permitted spin cycle.
  7. Wait until the machine has stopped before removing the laundry; finish draining, turn off the water supply and disconnect the machine as instructed.

The LG PT1300R/P1500RTW manual, for example, specifies separate capacities and how to position the spin cover. Do not use its times or water levels for another twin-tub machine.

Safe pauses

Do not transfer laundry while mechanisms are running or bypass the lids. If the machine vibrates excessively, stop it and wait before redistributing the load. Do not assume that washing, draining and spinning can be carried out simultaneously. The detergent dose and the load should be adjusted to the actual process, without adding more each time you transfer the laundry.

Complete each transfer with the mechanisms stopped, and check again that the laundry is within the limit for the tub receiving it.

View all articles in Routines, shared use and household situations