How to use a semi-automatic or twin-tub washing machine

With a semi-automatic machine, you need to complete the steps that the appliance does not perform automatically. In a twin-tub machine, washing and spinning have separate spaces and limits, so you may need to split the load when transferring it.

Identify the controls and capacities

Locate the wash timer, drain selector, water inlet and spin timer, where fitted. Check what each stated capacity refers to and the maximum for each compartment. Do not assume the wash capacity is also the capacity of the spin basket.

Operating sequence

  1. Sort the laundry and check that the detergent, load and water level are suitable according to the manual.
  2. Set the wash and fill selector as instructed; do not exceed the markings or add water hotter than permitted.
  3. Add detergent using the specified method and set a suitable wash time.
  4. When the cycle finishes, drain the machine using its control and complete the permitted rinse, following the manual for water and cycle stages.
  5. If you need to transfer the laundry, wait until all the relevant mechanisms have stopped completely. Distribute the laundry in the basket without exceeding its limit.
  6. Fit the inner safety cover if required by the design, close the lids and select the permitted spin setting.
  7. Wait until the machine has stopped before removing the laundry; finish draining, turn off the water supply and disconnect the machine as instructed.

The LG PT1300R/P1500RTW manual, for example, distinguishes between capacities and explains how to position the spin cover. Do not use its times or water levels for another twin-tub machine.

Safe pauses

Do not transfer clothes while mechanisms are running or bypass the lids. If excessive vibration occurs, stop the machine and wait before redistributing the load. Do not assume that washing, draining and spinning can be done simultaneously. The detergent dose and the load should suit the actual process; do not add extra amounts each time you transfer the laundry.

Complete each transfer with the mechanisms stopped, and check again that the load is within the limit of the tub receiving the laundry.

View all articles in Laundry routines, shared use and household situations