How to prepare a continuous wash-and-dry cycle

For a continuous cycle, all garments must be suitable for both washing and drying, and the load must be within the limit for this combination. The washing-only capacity may be greater than the permitted drying capacity.

Choose wash only, dry only or continuous

Check which operations the model offers and which programmes can be linked. A label stating that an item is machine washable does not confirm that it is suitable for tumble drying. Check fillings, elastic, coatings and accessories before choosing both phases.

If you want to wash more laundry than can be dried, use the sequence that allows you to remove some items before drying. Do not programme a continuous cycle expecting to deal with an excluded load later.

Prepare the whole process

  1. Read the labels and separate items with incompatible restrictions.
  2. Check the continuous-cycle limit and the actual load, including its volume.
  3. Use products suitable for items that will go through the drying phase.
  4. Select an available programme and drying target; do not copy settings from another machine.
  5. When the cycle finishes, wait for the door to unlock as indicated and remove the load in accordance with its care instructions.

Duration and interruption

The time shown may change during the process; check the conditions described in the manual before treating a change as a fault. Do not force the door or interrupt a hot phase using shortcuts.

If you need to stop the cycle or remove some items, follow the specific pause or cancellation procedure, including the cooling instructions where applicable. If a load repeatedly fails to dry, it needs a separate diagnosis; increasing the time will not correct an unsuitable load or poor distribution.

Before confirming a continuous cycle, check the load that will actually go through drying and the restrictions for all its items.

View all articles in Routines, shared use and household situations