All-in-one washer-dryer and separate appliances: practical differences

An all-in-one washer-dryer uses the same drum for washing and drying. Two separate appliances let you overlap tasks, but you have to transfer the laundry and have space and connections for both.

How the sequence of tasks changes

What the number of drums means
ConsiderationAll-in-oneTwo appliances
TransferIt can switch from washing to drying without moving the laundryThe laundry has to be moved to another appliance
Simultaneous operationThe drum completes one stage before starting the nextOne load can be washed while another is drying, if the installation allows
CapacityCapacity can differ between washing and a complete cycleEach appliance has its own capacity
AvailabilityWork on the combined unit can stop both functionsTasks rely on separate appliances

A washed load may need to be split

If the drying limit is lower, you cannot simply select wash and dry for the maximum wash load. You need to observe the capacity of the more restrictive stage or remove some items before drying. Programme data does not apply to all fabrics.

The technology determines the connections

There are different integrated drying systems. GE documents, for example, a washer-dryer with a heat pump and no external air-exhaust duct. Other designs have different requirements, including the use of water for condensation.

A laundry centre or tower with two drums is not an all-in-one washer-dryer either. When comparing formats, consider simultaneous tasks, actual loads and the space needed for full operation, not just the floor area.

Compare the journey of a typical load of laundry from dirty to dry, including the batches and transfers required.

View all articles in Types of washing machines and differences between formats