An all-in-one washer-dryer uses the same drum for washing and drying. Two separate appliances let you run tasks at the same time, but require you to transfer the laundry and have space and connections for both.
How the workflow changes
| Aspect | All-in-one | Two appliances |
|---|---|---|
| Transfer | Can switch from washing to drying without transferring items | Laundry must be moved to the other appliance |
| Simultaneous operation | The drum completes one stage before starting another | One load can be washed while another is drying, if the installation allows it |
| Capacity | May vary between washing and a complete cycle | Each appliance has its own capacity |
| Availability | A repair to the combined unit can stop both functions | Tasks depend on separate appliances |
A washed load may need to be split
If the drying limit is lower, selecting wash and dry for the full maximum wash load is not enough. You must observe the capacity of the most restrictive stage or remove some items before drying. Programme data does not apply to all fabrics.
The technology determines the connections
There are different integrated drying systems. GE documents, for example, a heat-pump washer-dryer with no external exhaust duct. Other designs have different requirements, including the use of water for condensation.
A laundry centre or tower with two drums is not an all-in-one appliance either. When comparing formats, consider simultaneous tasks, actual loads and the space needed for full operation, not just the floor area.
Compare the journey of a typical load of laundry from dirty to dry, including the batches and transfers required.
View all articles in Types of washing machines and differences between formats
