Laundry centre, tower and stacked appliances: what each format means

Laundry centre, tower and column are regional terms that can describe different configurations. Check whether there are two separate appliances joined with a kit or a factory-built structure with two drums.

Identify the structure of the set

Two stacked appliances retain their own product identification and are assembled using an approved combination. A factory-built set may share a frame, controls or connecting components and follow a single installation procedure. A visible gap between the drums does not prove that the set can be dismantled for transport.

In both cases, washing and drying take place in separate drums. The all-in-one washer-dryer uses a single drum, so it works in a different way.

What to check besides the number of drums

  • Controls: these may be on each appliance or grouped in one area; check that they are within reach.
  • Simultaneous operation: this depends on the set and the capacity of its supplies, not just on having two doors.
  • Drying: identify whether it uses venting, condensation or a heat pump, and check its documented connections.
  • Servicing: check whether servicing the lower appliance requires removing the upper one, and how much space is needed.

Assembly needs to be checked separately

The same width or brand does not prove that two appliances can be stacked. The guide to compatibility and stacking kits covers this requirement. Before deciding where to put the set, measure the height, openings and connection routes, including the space needed to remove it for future repairs.

A tower that fits vertically but prevents you from using the controls or opening a filter is not properly configured. The set's commercial name is no substitute for taking these measurements.

To identify the format, consider the number of drums, product rating plates and assembly manual; do not infer it from the word 'tower' alone.

View all articles in Types of washing machines and differences between formats