An all-in-one washer-dryer uses the same drum to wash and dry. Two separate appliances let you run tasks at the same time, but you need to transfer the laundry and have space and connections for both.
How the workflow changes
| Consideration | All-in-one | Two appliances |
|---|---|---|
| Transfer | Can switch from washing to drying without moving the laundry | The laundry must be moved to another appliance |
| Simultaneous operation | The drum finishes one phase before starting another | One load can be washed while another is drying, if the installation allows it |
| Capacity | May vary between washing and a complete cycle | Each appliance has its own capacity |
| Availability | An issue with the unit can stop both functions | Tasks depend on separate appliances |
A washed load may need to be split
If the drying limit is lower, you can’t select wash and dry for the full maximum wash load. You need to follow the capacity of the more restrictive phase or remove some items before drying. The settings for one program don’t apply to all fabrics.
The technology determines the connections
There are different integrated drying systems. For example, GE documents a heat-pump combination unit with no outdoor air-exhaust duct. Other designs have different requirements, including the use of water for condensation.
A laundry centre or tower with two drums isn’t an all-in-one unit either. To compare formats, consider tasks that can run at the same time, actual loads and the space needed for full operation—not just floor space.
Compare the steps involved in a typical load of laundry, from dirty to dry, including the batches and transfers required.
View all articles in Types of washing machines and differences between formats
