Microfibres from washing: capture filters and limits of effectiveness

Washing can release fibres from different textiles. Microfibre describes size and shape; microplastic refers to the material, so not every shed fibre is plastic.

The pump filter is not the same as fine filtration

An accessible drain filter may be designed to retain relatively large objects or debris. The same function should not be attributed to a specific microfibre device without knowing its retention size and how it was tested.

Devices and conditions to compare
LocationWhat to check
External outlet filterHydraulic compatibility, retention, capacity and maintenance
Purpose-built integrated filterFunction stated by the manufacturer and access to the collected waste
Device inside the drumTextiles, load and test programme, as well as compatibility with use

What the evidence allows us to claim

A community study by Erdle and colleagues installed filters in 97 households and observed a reduction in microfibres in the final effluent of the system studied. That result does not allow the same percentage to be assigned to other filters, fabrics or installations.

The National Park Service describes external and drum-use devices. Comparing them requires a protocol, a retention size and a method of measurement: fibre mass and fibre count are not interchangeable metrics.

Installation and disposal of captured fibres

A filter must not restrict the drain beyond what is permitted. Follow the manufacturer's instructions on how often and how to remove it. Keep captured fibres for the specified waste-disposal route; do not return them to the drain when washing the filter element.

Care for synthetic fabrics and the environmental footprint cover other parts of the problem. No claim is made of total capture, and no worldwide legal requirement is assumed.

Compare results from the same test and make sure captured waste is disposed of appropriately.

View all articles in Washing machine efficiency: electricity, water and sustainability