C02 indicates a drainage failure on the documented Hitachi models. First, identify whether your machine drains by pump or gravity; the correct hose position depends on that design.
The official Hitachi FAQ distinguishes between the two drainage systems. So there is no single hose height that applies across the brand.
Check the external drain hose
With the machine switched off, check whether water is trapped and whether the hose is kinked, damaged or compressed. Also check the household connection. Don’t raise a gravity-drained outlet by copying a front-loading model, or lower a pump-drained outlet without checking its manual.
If there’s a user-accessible filter, follow the safe draining procedure before cleaning it: disconnect the power, make sure the water is cool and have containers ready. Don’t open a closure while water is trapped, and don’t assume all filters are in the same position.
If C02 reappears after you’ve checked the external outlet, arrange a diagnosis. The pump may make a noise even when there’s little flow; this doesn’t confirm that drainage is working properly or automatically mean the pump should be replaced.
Provide the model number and a description of the drain installation, especially if C02 started after the machine was moved.
View all articles in Hitachi washing machine error codes and alerts
