Error C02 in Hitachi washing machines: no drainage

C02 indicates a drainage failure on the documented Hitachi models. First, determine whether your washer drains by pump or by gravity; the correct hose position depends on that design.

The official Hitachi FAQ distinguishes between the two drainage systems. That’s why there’s no single hose height that applies to every model from the brand.

Check the external drain hose

With the appliance stopped, check for standing water and see whether the hose is kinked, damaged or compressed. Also check the household drain connection. Don’t raise a gravity-drain outlet by copying a front-load washer, or lower a pump-drain outlet without checking the manual.

If there’s a user-accessible filter, follow the safe draining instructions before cleaning it: disconnect the power, make sure the water is cool and have containers ready. Don’t open a closure while water is still inside, and don’t assume all filters are in the same location.

If C02 returns after you’ve checked the external drain, request a diagnosis. The pump may make noise even when the flow is low; that doesn’t confirm proper drainage or justify replacing the pump automatically.

Provide the model number and a description of the drain setup, especially if C02 started appearing after a move.

View all articles in Hitachi washer error codes and warnings