C02 indicates a drainage failure in the documented Hitachi models. First check whether your machine drains using a pump or by gravity; the correct hose position depends on this design.
The official Hitachi FAQ distinguishes between the two drainage systems. So, there is no single hose height that applies to every model from the brand.
Check the external drain route
With the machine switched off, check whether water is retained and whether the hose is bent, damaged or crushed. Also check the household connection. Do not raise a gravity-drain outlet by copying the setup of a front-loading machine, or lower a pump-drain outlet without checking its manual.
If there is a user-accessible filter, follow the safe draining procedure before cleaning it: disconnect the power supply, make sure the water is cool and have containers ready. Do not open a closure while water is retained, and do not assume that all filters are in the same position.
If C02 reappears after you have checked the external drain, request a diagnosis. The pump may make a noise even when the flow rate is low; this does not confirm that drainage is working correctly or justify replacing the pump automatically.
Provide the model number and a description of the drain installation, especially if C02 appeared after the machine was moved.
View all articles in Hitachi washing machine error codes and alerts
