C02 error on Hitachi washing machines: no drainage

C02 indicates a drainage failure on the documented Hitachi models. First identify whether your machine drains by pump or gravity; the correct position for the hose depends on that design.

The official Hitachi FAQ distinguishes between these two drainage systems. So there is no single hose height that applies across the brand.

Check the external drainage route

With the appliance switched off, check whether water is trapped and whether the hose is kinked, damaged or compressed. Also check the household connection. Do not raise a gravity-fed outlet by copying the arrangement for a front-loading model, or lower a pump-drained outlet without checking its manual.

If there is a user-accessible filter, follow the safe draining procedure before cleaning it: disconnect the power, make sure the water is cool and have containers ready. Do not open a closure while water is trapped, and do not assume all filters are in the same position.

If C02 reappears after you have checked the external drainage route, request a diagnosis. The pump may make a noise even when the flow is low; this does not confirm that drainage is working correctly or justify replacing the pump automatically.

Provide the model number and a description of the drainage installation, especially if C02 started after the appliance was moved.

View all articles in Hitachi washing machine error codes and warnings