Use pause for a temporary interruption and cancel to end or change the sequence, as set out in the manual. Add clothes only when the available function permits it and the machine allows the door to be opened.
Choose the right way to interrupt the cycle
Pausing does not drain the water or cool the contents immediately. The door may remain locked because of the water level, temperature or movement. Not all options can be changed once a phase has started either: check which changes are possible with pause and which require cancellation.
- Use the pause or add-clothes control described in the manual.
- Wait for the movement to stop and for the door-release indicator to appear. Do not keep pulling at the door.
- Check that the added garment is within the load limit and meets the load requirements.
- Close the door properly and resume using the machine's procedure.
Cancel without blindly adding another dose
When you cancel, the machine may drain water or require you to make another selection. Check which phase had been completed and whether detergent had already been added. Do not add another full dose just because you are starting a different programme: product may remain on the clothes, or automatic dosing may still be in progress.
If you are unsure how much product remains, check the manufacturer's reset and rinse procedure. Avoid opening filters or using a mechanical release for a routine programme change.
If the normal procedure does not release the door, follow the locked-door check. Do not force the lock or remove clothes while mechanisms are moving.
View all articles in Washing machine programmes, settings and controls
