
Before selecting a programme, check what the machine can handle and which garments can tolerate the same treatment. Sorting by colour helps, but construction, soil and lint shedding also matter.
Check before putting a load together
Spread out garments as needed to spot stains, loose seams and objects. Empty pockets, remove accessories that cannot be washed, and prepare fastenings according to the garment’s construction: protect hooks or hook-and-loop fasteners that could snag other fabrics. Do not secure drawstrings with improvised knots that could prevent proper cleaning or cause tangling.
Read the complete care label. The composition alone does not describe linings, fillings, prints or electrical components. Check the filter for items that must not be washed before looking for a gentle programme.
Put together a compatible load
Compare temperature, mechanical action, colourfastness and type of soil. A towel that sheds fibres and a garment that attracts them may suit the same temperature but still be a poor combination. Sorting laundry helps you weigh up these requirements without creating a separate load for every item.
If a stain needs pretreatment, use a product approved for the area and fabric. Pretreatment does not mean you can mix chemicals or leave the product to dry on the garment.
From the laundry basket to the drum
Check the maximum load for the programme, not just the machine’s rated capacity. Place garments as their construction requires, without compressing them just to close the door.
Laundry bags can help contain certain small items or protect fastenings, but they need room for water and movement. They do not make a prohibited item suitable for washing. After loading, check that nothing is caught in the door seal before starting.
Frequently Asked Questions
What should I do if a garment has no care label?
Look up the item’s reference or the manufacturer’s instructions. If you cannot confirm how to care for it, especially if it is a structured or padded item, do not assume it can be machine-washed based on its appearance.
Should new clothes be washed separately?
It depends on the instructions and how colourfast the garment is. If dye from a new garment could transfer, keep it in a compatible separate load until you have followed the manufacturer’s instructions.
Which requirement takes priority if colour and fabric call for different loads?
Both requirements must be met. If there is no shared treatment that protects the colour and fabric, wash the garments separately; do not try to make an incompatible load suitable by using a gentler setting or a colour-catcher sheet.
Once your garments are suitable for washing, sorted and prepared, choose a programme and load size that will care for them properly.




