E1 points to a drainage issue on the documented Toshiba AW-E900LM top-load washer. Check the drain hose routing without copying the height requirements of a front-load washer with a pump.
This association is confirmed on page 18 of the official AW-E900LM manual. A table that attributes E1 to water intake should not be applied to this model.
Check the hose with the machine stopped
Check whether the hose is installed as described in the manual, and whether it is bent, pinched or externally blocked. Also check whether its end is submerged and whether it has been exposed to freezing temperatures. A hose that appears clear along one section may be restricted at its final connection.
Follow the model's drain system design: raising the hose to imitate an installation with a pump can prevent draining. Do not take apart the valve or drain motor.
For the AW-E900LM, after correcting an external issue and with the drum stopped, the manual says to open and close the lid once, then press Start/Hold to resume. If E1 returns, request an inspection; do not keep trying to spin with water retained, and do not open the appliance to check internal components.
Describe how the hose ends and whether its installation has been changed; this will help assess proper drainage for this top-load washer.
