Miele F16 error: too much detergent or additives

Miele F16 is related to excess detergent or additives. The checks should include the programme and all products used on the clothes.

Check stain removers too

The manufacturer’s documentation covers excessive additives, an unsuitable programme and too much foam caused by over-dosing. Do not count only what you poured into the dispenser drawer: generous pre-treatment also goes into the wash with the clothes.

Compare the amount used with the product packaging, taking the level of soiling and water hardness into account. Adjust for the actual load and the product’s concentration. If you use automatic dosing, check that you have not also added a full manual dose out of habit.

Note the programme, type of clothes, detergent and additives used. If the warning appears only with a treated garment or after changing products, these notes can help you adjust the wash without assuming that a sensor is at fault.

Follow the manual’s instructions for resuming the cycle; do not add homemade anti-foam remedies or mix cleaning products. Dosing according to load and soiling explains how to adjust the dose. If F16 returns after you have corrected the conditions, or if water is also being retained, contact service support and report both details.

To correct an excessive dose, consider any residue that may remain on the clothes before running the wash again.

View all articles in Miele washing machine error codes and messages