Error C01 in Hitachi washing machines: no water supply

C01 indicates no water supply in the Hitachi table consulted. Check that water is available and reaching the machine before attributing the code to a faulty valve.

This information comes from the official Hitachi Home Appliances FAQ. Check the connection diagram in the manual for your local model.

What changed before the warning appeared

If there was an outage, check that the water supply has been restored. If the machine was recently installed or moved, check the tap and the external hose route: the tap may be closed or the hose may be crushed, even if the rest of the house has water.

Check how many inlets your appliance requires. Do not force a dual connection on a single-inlet model, and do not disconnect a hose while the tap is open. Clean the inlet filters only if the manual identifies this as user maintenance, with the power and water supplies isolated.

If C01 appears again when the external water supply is working correctly, note whether water is reaching the drum and request an inspection of the fill system. The message does not identify the motor, valve or sensor individually.

Report whether the warning began after an installation change or with no prior changes; this helps narrow down the water-supply check.

View all articles in Hitachi washing machine error codes and alerts