C01 indicates no water supply in the Hitachi table consulted. Check that water is available and reaching the machine before attributing the code to a faulty valve.
This correspondence comes from the official Hitachi Home Appliances FAQ. Check the connection diagram in the manual for your model.
What changed before the warning
If there was an interruption, check that the water supply has been restored. If the machine has just been installed or moved, check the tap and the external hose route: the tap may be closed or the hose may be kinked even if the rest of the home has water.
Check how many inlets your appliance requires. Do not try to fit a dual connection to a model with a single inlet, or disconnect a hose while the tap is open. Clean the inlet filters only if the manual identifies this as user maintenance, with the power and water supplies isolated.
If C01 returns while the external water supply is working correctly, note whether water is reaching the drum and request an inspection of the filling system. The message does not identify the motor, valve or sensor individually.
Say whether the warning began after an installation change or without any prior changes; this helps pinpoint where to check the water supply.
View all articles in Hitachi washing machine error codes and warnings
