C01 means no water supply in the Hitachi table consulted. Check that water is available and reaching the machine before attributing the code to a faulty valve.
This correspondence comes from the official Hitachi Home Appliances FAQ. Check the connection diagram in the manual for your model.
What changed before the alert
If there was an interruption, check that the water supply has been restored. If the machine was just installed or moved, check the tap and the external hose route: the tap may be closed or the hose kinked even if the rest of the home has water.
Confirm how many inlets your appliance requires. Do not force a dual connection on a single-inlet model or disconnect a hose while the tap is open. Clean the inlet filters only if the manual lists this as user maintenance, with the power and water supplies shut off.
If C01 returns while the external water supply is working properly, note whether water is reaching the drum and request an inspection of the filling system. The message does not identify the motor, valve or sensor individually.
Mention whether the alert began after an installation change or with no prior changes; this helps pinpoint the water supply check.
View all articles in Hitachi washer error codes and warnings
