Laundry centre, tower and column are regional terms that can describe different setups. Check whether there are two separate appliances joined with a kit, or a factory-built structure with two drums.
Identify the structure of the setup
Two stacked appliances keep their own product identification and are installed using an approved combination. A factory-built unit may share a frame, controls or connecting components and follow a single installation procedure. A visible gap between the drums does not prove that the unit can be taken apart for transport.
In both cases, washing and drying take place in separate compartments. The all-in-one washer-dryer uses a single drum, so it works differently.
What to check besides the number of drums
- Controls: they may be on each appliance or grouped in one area; check that they are within reach.
- Simultaneous operation: this depends on the setup and the capacity of its utility connections, not just on having two doors.
- Drying: identify the exhaust, condenser or heat pump system and its documented connections.
- Servicing: check whether the upper appliance has to be removed to service the lower one, and how much space is needed.
Installation needs to be checked separately
The same width or the same brand does not prove that two appliances can be stacked. The compatibility and stacking kit guide covers this requirement. Before deciding where to put the unit, measure the height, openings and connection routes, including the space needed to remove it later for repairs.
A tower that fits vertically but makes the controls unusable or prevents a filter from opening is not properly set up. The unit’s marketing name does not replace these measurements.
To identify the format, check the number of drums, product labels and installation manual; don’t rely on the word ‘tower’ alone.
View all articles in Types of washing machines and differences between formats
