Hoover error E04: check for excess detergent

For Hoover Dynamic Next, the official E04 guidance recommends checking for excess detergent. If the water supply does not stop, prioritise the water supply and request assistance.

Foam after adding detergent

The manufacturer’s documentation advises checking whether too much detergent was added. Note the product, concentration and amount, along with any additives or pre-treatment products. A dose for a full load may be excessive for just a few items.

Follow the recovery procedure in the manual and let the foam subside without using homemade anti-foam products. Do not add detergent to try to finish the cycle. The Hoover Dynamic Next index helps distinguish E04 from water inlet and drainage warnings.

Water level continues to rise

If you notice a continuous water supply, a rising water level or an overflow, turn off the accessible tap, stop using the machine and request an inspection. Do not assume it is all due to detergent, or repeatedly reset the machine while the water supply is open.

If E04 returns with the correct dose and no visible issue that you can resolve, provide the Dynamic Next model and the stage at which the error appears. The warning alone does not prove that a solenoid valve is faulty, and should not be assumed to apply to every Hoover range.

Record foam and water level as separate observations: they may lead to different decisions.

View all articles in Hoover washing machine error codes and alerts