Error E04 on Hoover: check for excess detergent

For Hoover Dynamic Next, the official E04 guidance recommends checking for excess detergent. If the water inlet does not stop, prioritise the water supply and request assistance.

Foam after adding detergent

The manufacturer's documentation asks you to check whether too much detergent was added. Note the product, concentration and quantity, along with any additives or pre-treatments. A dose intended for a full load may be excessive for just a few items.

Follow the recovery procedure in the manual and allow the foam to subside without using homemade defoamers. Do not add detergent to try to finish the cycle. The Hoover Dynamic Next index helps distinguish E04 from water inlet and drainage alerts.

Water level continues to rise

If you notice a continuous water inlet, a rising water level or an overflow, turn off the accessible tap, stop using the machine and request an inspection. Do not assume that detergent is the cause of everything, or repeatedly restart the machine while the water supply is on.

If E04 returns despite using the correct dose and there is no visible condition you can correct, provide the Dynamic Next model and the stage at which the error appears. The alert alone does not prove that a solenoid valve has failed, and should not be applied to every Hoover product range.

Record foam and water level as separate observations: they may call for different actions.

View all articles in Hoover washing machine error codes and alerts