Hoover Error E04: Check for Too Much Detergent

For Hoover Dynamic Next, the official E04 guidance recommends checking for excess detergent. If the water supply does not stop, prioritize shutting off the water and request assistance.

Foam after adding detergent

The manufacturer’s documentation recommends checking whether too much detergent was added. Note the product, concentration and amount, along with any additives or pre-treatments. A dose intended for a full load may be excessive for a few items.

Follow the recovery procedure in the manual and let the foam subside without using homemade defoamers. Don’t add detergent to try to finish the cycle. The Hoover Dynamic Next index can help distinguish E04 from water inlet and drainage alerts.

Water level continues to rise

If you notice continuous water intake, a rising water level or overflow, turn off the accessible tap, stop using the washer and request an inspection. Don’t assume it’s all due to detergent, and don’t repeatedly restart the washer while the water supply is on.

If E04 returns with the correct dose and no visible condition that you can correct, provide the Dynamic Next model and the cycle stage when it appeared. The alert alone does not prove that a solenoid valve has failed, and it should not be applied to every Hoover product family.

Record foam and water level as separate observations: they may lead to different decisions.

View all articles in Hoover washing machine error codes and alerts