E12 in the Beko B3WFU48215WW ES table warns of possible water inside or under the machine. If you see a leak, turn off the taps and request service.
External inspection
The manufacturer’s documentation advises requesting service if the condition persists or a hose leak is visible. From a dry area, check where the water is appearing: the inlet connection, drain outlet, filter or base of the cabinet. Note which stage of the cycle it occurs during.
Disconnect the machine only if the outlet is dry and accessible. If water reaches electrical connections, do not touch the plug or walk through the water; ask for help to isolate the appliance. Do not open panels to locate internal water.
Drying it is not the same as repairing it
Removing water from the floor lets you watch for further leaks, but does not confirm that the source has been fixed. Do not tilt the appliance or run a test cycle if it is still dripping. The Beko index lets you compare the warning with the documented platform.
If E12 comes from a historical record, distinguish that information from a current leak. If the issue recurs or the source is inaccessible, the complete model number is needed for diagnosis; do not extrapolate the table to another Beko model.
Note where the water is before drying it, provided you can do so without approaching a wet electrical area.
