On the Toshiba AW-E900LM, E2-1 calls for checking whether the lid is open, while E2-3 points to the latch or lock. Both are displayed with a second alternating part that should be recorded.
The official top-loading manual distinguishes these states in its table on page 18. It does not interpret an E2 by itself for other Toshiba models.
Respond to the indicated status
For E2-1, check that the lid is completely closed. If you need to move clothing, wait until the motion stops before reaching into the drum.
For E2-3, stop and turn off the appliance as directed in the manual before checking for visible obstructions in the latch. The lid may be lowered without being latched or detected. Remove only clothing or objects you can reach, without disassembling the mechanism.
Do not use magnets or jumper wires to simulate a closed lid. If it does not latch normally, is damaged, or the message appears again, stop trying to start the washer and request service. What to do next depends on the exact code; do not substitute repeatedly closing the lid for the locking instructions.
Photograph both parts of the sequence; this makes it possible to distinguish E2-1 from E2-3 even when the first group on the display is identical.
