GE Combo Error 353: Clogged lint filter

GE UltraFast Combo error code 353 is often associated with fabric softener residue on the lint filter. The check concerns the drying air circuit.

Separate the filter foam and mesh

The manufacturer's documentation distinguishes the two parts of the lint filter. With the appliance stopped, remove it through the user-access opening and separate the pieces as shown in the manual. Clean the foam and mesh using the approved method, without scraping them with tools or tearing the material.

A layer of product can restrict airflow even when there is no visible buildup of lint. Reinstall the pieces in the correct orientation before using the Combo; do not run a drying cycle without the filter to see if performance improves.

Assess the result

After cleaning, use the wash-and-dry check specified by GE and note whether error 353 reappears. If the filter is correctly installed but drying is still abnormal, request service.

18 and Check and Clean Drain Pump Filter are part of the water circuit. The GE Appliances index helps you distinguish them without assuming that every long drying cycle is caused by the same filter.

You should see an improvement with the complete filter assembly correctly installed.

View all articles in GE Appliances Washer Error Codes and Alerts