OE, E03 and E21 indicate a drainage problem on LG front-load washers whose documentation groups these codes together. Before opening the filter, check for trapped water and inspect the external hose.
The LG front-load table groups these three code formats together. Use this equivalence only if it applies to your appliance; SideKick drainage access and controls are different.
See what happens when it tries to drain
- If water remains and the hose is kinked or crushed behind the cabinet, check this restriction before blaming a component.
- If you can hear the pump but no water comes out, the sound only confirms that it is running; it does not prove that it can move enough water.
- If water drains but the alert reappears, note whether drainage stops or is slow. Don’t assume the system is clear just because some water has drained.
With the appliance stopped, check the visible hose route and the household drain outlet. To open an accessible filter, follow the manual’s residual-drain procedure, with the power disconnected, the water cool and containers ready. Unscrewing it suddenly can release water from the drum.
The drain hose installation must comply with the height and connection requirements for your model. If it still won’t drain after checking the outside and carrying out any authorised cleaning, request a diagnosis of the drainage failure.
Mention whether there was water, whether you could hear the pump, and what restriction or debris you found; this information is more useful than requesting a new pump based on the code.
View all articles in LG washing machine error codes and messages
