OE, E03 and E21 indicate a drainage problem in LG front-load washers whose documentation groups these codes together. Before opening the filter, check for standing water and inspect the external hose.
The LG front-load washer chart groups these three codes together. Use that equivalence only if it applies to your appliance; SideKick drainage has different access points and controls.
Watch what happens when the washer tries to drain
- If water remains and the hose is bent or crushed behind the appliance, check that restriction before blaming a part.
- If you hear the pump but no water comes out, the sound only confirms that it is running; it does not prove that it can move enough water.
- If water comes out and the error reappears, note whether draining stops or is slow. Don’t assume the drain path is clear just because some water drained.
With the washer stopped, check the visible hose path and the household drain outlet. To open an accessible filter, follow the manual’s instructions for draining residual water, with the washer unplugged, the water cool and containers ready. Unscrewing it all at once can release water from the drum.
The drain hose installation must follow the height and connection requirements for your model. If it still won’t drain after you check the exterior and clean any parts as instructed, request a diagnosis for a drainage failure.
Report whether there was water, whether you heard the pump and what restriction or debris you found; those details are more useful than ordering a new pump based on the code.
