How to prepare a continuous wash and dry cycle

For a continuous cycle, all garments must be suitable for both washing and drying, and the load must be within the limit for that combination. The washing-only capacity may be higher than the permitted drying capacity.

Choose wash only, dry only or continuous operation

Check which operations and programmes can be linked on your model. A label that permits machine washing does not confirm that an item is suitable for tumble drying. Check fillings, elastic, coatings and accessories before choosing both phases.

If you want to wash more laundry than can be dried, use a sequence that lets you remove some items before drying. Do not schedule a continuous cycle expecting to deal with an unsuitable load later.

Prepare the complete process

  1. Read the labels and separate items with incompatible care restrictions.
  2. Check the continuous-cycle limit and the actual load, including its volume.
  3. Use products approved for garments that will go through the drying phase.
  4. Select an available programme and drying target; do not copy settings from another machine.
  5. When the cycle ends, wait for the door to unlock as expected and remove the load in accordance with its care instructions.

Duration and interruption

The time displayed may change during the process; check the conditions described in the manual before interpreting a change as a fault. Do not force the door or interrupt a hot phase using shortcuts.

If you need to stop the cycle or remove some items, follow the specific pause or cancellation instructions, including cooling instructions where applicable. If a load repeatedly fails to dry, it needs a separate diagnosis; increasing the time will not correct an unsuitable load or poor distribution.

Before starting a continuous cycle, check the load that will actually go through drying and the restrictions for all its garments.

View all articles in Laundry routines, shared use and household situations