Before pre-treating, identify the garment, the likely source of the stain and the permitted treatments. Use a product formulated for that purpose; do not combine substances to deal with unknown causes.
Separate loose material from set-in stains
Carefully remove any surface residue that can be taken off the garment, without spreading it or rubbing a delicate area. Mud, grease and a pigmented mark do not necessarily require the same treatment. An old stain or one that has already been heated may respond differently from a fresh one.
| Observation | What to do first |
|---|---|
| Particles or surface crust | Remove using a method suitable for the garment before they disperse in the wash load. |
| Grease or body soil | Use a product approved for that fabric and type of soil. |
| Protein-based soil | Check the product instructions and temperature before applying heat. |
| Colour change with no residue | Distinguish a stain from discolouration, which may not be washable. |
Apply the product and complete the process
- Read the stain remover label and carry out only the preliminary test it specifies.
- Follow the instructions for quantity and contact time, and any colour or fibre restrictions. Do not let the product dry on the fabric if the instructions prohibit it.
- Choose a cycle suitable for the entire load and account for any additional product.
- Check the result before tumble-drying or repeating the treatment.
The enzymes are a formulation feature, not a guarantee that every stain will be removed. If new marks appear only after washing, follow the investigation steps instead of intensifying the initial pre-treatment.
Checking before drying will help you decide whether to stop the treatment, repeat an application that is permitted, or seek a different recovery method.
