Ub, UE and U6 indicate an imbalance that may prevent a Samsung washing machine from completing the cycle. Ur means the machine is trying to balance the load again.
The distinction comes from the Samsung USA table. Ur may extend the programme without, by itself, indicating a fault.
Wait for the retry or correct the stopped load
If Ur appears and the machine continues its recovery, allow the sequence to run its course. Do not routinely open the door or cancel the programme just because the time is increasing.
If the machine stops with Ub, UE or U6, pause and wait until the drum and door lock allow you to intervene. Untangle and redistribute clothes that have clumped together. Check whether a very absorbent item is mixed in with lighter clothes, or whether the load exceeds the programme's capacity; the solution is not to add or remove clothes without considering their fabric and composition.
Check that the washing machine is stable when it is stopped. If it rocks, or the problem began after it was moved, the installation also needs to be checked. Do not increase the spin speed to override the protection.
dC should be interpreted according to the model before including it in this group. If the issue recurs with suitable loads and the machine is stable, seek assistance.
Note whether the machine managed to resume spinning or eventually aborted: this distinguishes an informational retry from a persistent issue.
View all articles in Samsung washing machine error codes and alerts
