An automatic washing machine manages the programme stages. In a semi-automatic twin-tub machine, clothes are washed in one tub and moved to another to spin out the water.
Two ways to organise the same load of washing
With an automatic machine, the controls can manage filling, washing, draining, rinsing and spinning once the programme has been set. With a twin-tub machine, the user steps in between operations and has to manage the water supply, draining or moving the clothes, depending on the design. The exact sequence cannot be determined from the number of controls.
As an example of this distinction, Samsung India describes its automatic and semi-automatic models. The capacities and features of that range cannot be assumed to apply to all brands.
Water and moving clothes
Some semi-automatic machines can be filled manually; others require specific connections or have specific limits. Water may be drained by gravity or with a pump. Positioning a hose as you would for an automatic machine with a pump may prevent a gravity-drained tub from emptying.
The spin basket may hold less washing than the wash tub. So one load of washing may need to be spun in several batches. Capacity figures should be read according to the function they refer to, using dry laundry as the reference where specified.
Practical considerations
If the water supply is unreliable, it matters which operations the manual says can be carried out without continuous water pressure. If you have limited time to attend to the wash, consider how many times you will need to intervene. Spinning removes water but does not replace heated drying.
Two tubs intended for washing and spinning are also not the same as two modules that wash at the same time. Keeping these concepts separate avoids confusing productivity with function.
Before planning a load, check who controls each stage: the machine, the user or both.
View all articles in Types of washing machines and differences between formats
