Error F05 on Indesit: drainage, blockage or pump problem

The documented F05 on Indesit indicates a drainage blockage or pump problem. The checks you can carry out focus on the filter, hose and household drain.

Door locked with water inside

The manufacturer’s documentation describes F05 as occurring both when the door is locked and when water remains in the drum. Don’t treat a door that won’t open as a separate fault before checking that the water has drained.

Check the drain hose for kinks and the household drain for any water backing up. If it connects beneath a sink, note any blockage in the trap. Check the installation measurements against the model manual.

Clean without causing an uncontrolled outflow

If there is a user-accessible filter, switch off and safely disconnect the appliance, let the water cool and prepare a container. Drain it gradually using the specified method before removing the filter; clean the accessible parts and close it properly. See cleaning the pump filter.

If you are not authorised to access it, or drainage still fails, request a service visit. F05 does not confirm that the pump needs replacing. Keep a record of the panel layout if you obtained the code from the lights, to avoid misreading it.

Do not start another wash while water remains that the appliance cannot drain.

View all articles in Indesit washing machine error codes and warnings