On LG SideKick, dE1 points to the drawer, dE2 to its lock and dE3 to the inner lid. Identifying which of the two closures is involved helps you avoid working on the door of the main washer.
| Code | What to check |
|---|---|
| dE1 | The drawer is not properly closed. |
| dE2 | The drawer closes, but does not confirm that it is locked. |
| dE3 | The inner lid is not latching. |
This association comes from the official pedestal support. Keep the model in mind: other mini washers may use codes such as dE4 or dO, which should be interpreted using their own tables.
Checking the two closures
Pause and wait for movement to stop and for the drawer to be able to open. Check that no clothing is preventing the lid from sitting properly. For a new installation, check whether any packaging film is visible on the edge; do not remove parts from the switch or dismantle the lock.
Close the lid and then the drawer, following the manual. If they fit without obstruction and the warning reappears, do not hit them or hold down the sensor. Note whether the problem is a drawer that does not go all the way in, one that does not lock, or an inner lid that does not latch.
If the affected display is on the main washer, use its front-load washer table: the same dE prefix does not identify the same closures.
View all articles in LG washing machine error codes and messages
