The quick cycle is suitable for small or lightly soiled loads that the manual allows. By default, it isn’t a substitute for everyday washing of a full drum or for a hygiene procedure.
Before choosing the shortest cycle
Check the programme’s specific maximum load and the types of clothing it’s intended for. A garment worn briefly and without stains may need a different treatment from damp towels, muddy clothes or garments with built-up grease. If the soil requires pre-treatment, do so according to the care label; don’t expect a shorter cycle to take care of that step.
Distinguish a programme called “Quick” from an option that shortens another programme. The latter may have its own load and soil-level restrictions, even if it retains the main cycle’s name.
Prepare the detergent and load
- Separate garments with incompatible care requirements and leave enough room for movement, as directed in the manual.
- Measure the detergent for the actual load. A short cycle isn’t a reason to add an extra dose.
- Check that the product format is suitable for the selected temperature and cycle duration.
- When the cycle ends, check for soil and detergent residue before drying.
If detergent is visible, check the residue and rinse: don’t automatically add more cleaner. If a specific stain remains, follow its compatible pre-treatment and then use an approved cycle that can finish the job.
The stated duration is a programme setting, not a guarantee that results will be identical across machines. Compare results using a measured dose and a load that stays within the limit.
