Agitator, impeller and pulsator: how they wash and how they differ

An agitator is a central column that moves the clothes; an impeller or pulsator is a low-profile disc. Both need the load to be able to move around, although they distribute the mechanical action differently.

How the washing motion works

From the moving part to the action on clothes
SystemMoving partMain interaction
AgitatorColumn with fins that oscillatesThe column moves the clothes and encourages friction
Impeller or pulsatorBottom disc that rotates according to the cycleThe movement redistributes the load and encourages friction between clothes

The Whirlpool explanation of both mechanisms documents this difference and the variant with a removable agitator. Removing it is only appropriate for machines designed for this conversion; it does not turn just any machine into an impeller model.

Available space and washing results

A column takes up some of the centre of the basket. A low-profile plate leaves more space in the centre, but that does not mean you can compress a duvet to fill every gap: effective movement still needs room. A garment that cannot move may prevent the action the system is meant to produce.

The shape of the part alone does not determine the amount of water used or how clean the clothes get. The programme, load, detergent and controls all play a part. The HE label is another feature, and it does not indicate whether the motor uses a belt or direct drive.

When a question becomes a fault

Changes in rotation direction and pauses can be part of the cycle. If the expected movement does not begin after filling, compare it with the manual and check no agitation in a top-load washer; do not assume there is wear and tear based on a single pause.

A useful comparison asks how your actual load can move, as well as how much space seems to be left in the drum.

View all articles in Types of washing machines and differences between formats