Reusable nappies need a routine that cleans absorbent inserts while protecting covers and elastics. Identify which parts come apart and what the washing machine can handle before choosing a programme or temperature.
Components with different limitations
An insert, a waterproof cover and an all-in-one system may have different instructions. Check whether your washing machine can handle waterproof barriers; a washable nappy label does not override the machine’s restrictions.
Remove and dispose of solids using the applicable safe and locally approved method. Separate components according to the design, prepare fastenings and store used nappies in the designated container, out of children’s reach. Do not leave them to build up indefinitely or treat soaking as compulsory.
Prepare the necessary wash stages
The NHS says that washable nappies do not necessarily need to be soaked beforehand, recommends washing nappies soiled with faeces separately from other laundry and warns that fabric conditioners can reduce absorbency. The temperature and sequence for your particular system must still be suitable for all its components.
- Check whether the instructions call for an initial soil-removal stage followed by a main wash.
- Load the machine so that the nappies can be cleaned and rinsed; do not pack the drum with compressed absorbent inserts.
- Measure detergent for the stages specified, rather than halving or doubling the dose out of habit.
- Dry each component fully as permitted before reassembling and storing.
Odour or loss of absorbency
Check your routine, detergent dose, rinsing and the condition of the layers before using an aggressive descaling treatment. In the event of illness, follow the specific health guidance. A temperature reading on its own does not certify hygiene.
Check that the nappies are clean and absorbent and that the covers are in good condition before reassembling them; any unusual odour is a reason to review your routine.
View all articles in Laundry hygiene and specific washing needs
