vS / uS / u5 error on LG washing machines: vibration detection fault

vS, uS and u5 are documented readings of a possible vibration detection fault on LG front-loading washing machines. They are not equivalent to UE, which indicates an unbalanced load.

The LG table recognises these display variants. A photo can help distinguish the letter S from the number 5 and preserve the message for support.

What you can check from this information

Note whether the warning appears at the start, during a slow spin or during the spin cycle. Observe whether it recurs with different loads you have already used; there is no need to run new tests to make it happen again.

Adding clothes may be a remedy for certain load imbalances, but it does not verify a vibration sensor. If your manual authorises you to resume or restart, follow that recovery procedure once and check the result. If the warning recurs, the detection system and connections need investigating.

Do not remove panels to move connectors or replace dampers because of this message. Poor support may also be a factor, but observing that the machine vibrates does not show which component caused vS.

Give the technician the image of the display and the recorded stage; keep the distinction between a balance problem and a detection warning.

View all articles in LG washing machine error codes and alerts